U type aluminum square pass is a kind of more flexible ceiling product. It is generally applicable to the ceiling decoration. The bottom width is within 300mm. The height is generally within 400mm. The length is generally recommended in three to four meters, which is convenient for processing and transportation. The maximum length can reach 6 meters. If more than 6 meters long, it can be used to meet the use length requirements with the connection parts. The size of the inner part is just inside the inner card, it can spray color or do not spray color. If the master process is good, the connection is generally relatively dense and can not see the seam. But if the connection is not good, it will see a seam, easy to see the connection, this time, the best connection part is better color color. That's right.
U type aluminum square can be made by rolling and bending, manual intermittent bending and sheet metal processing. Rolling and bending are the most commonly used U-shaped aluminum square processing technology, the general size and size can be met, and artificial intermittent bending forming is suitable for some large size U-shaped aluminum square or thick U-shaped aluminum square. On the other hand, the process of sheet metal process can process all kinds of arc U-shaped aluminum square Tong, heteromorphic U-type aluminum square pass, wave modeling U type al square Tong and other special products. The price of U-shaped aluminum square for different processing technology is different. The price of U-shaped aluminum square pass in rolling and bending is generally 0.3-0.8 yuan and one meter, and the artificial bending is generally about 2 yuan. M, and sheet metal processing is calculated according to the unit price of the square.
